Curious how accurate the mini gauges are. I was told the ratios available aftermarket are close but not the same. This will give inaccurate readings. jdseibe, have you ever checked your against a GPS speedometer/app?
Posts made by valvesprung
Then came the clutch. It had begun slipping when rolling on hard at higher speed. I figured it would be a simple job, but man…what a pain.
And that’s about it for now! She rides like a champ and I can’t wait to rack up some road trip miles this summer.
Then came the brakes and forks! I added an SV650 master cylinder which helped with brake feel, but not with power. A buddy was looking for some design projects for his CNC class, so he designed and 3D printed some caliper adapters to hang some matching SV650 calipers. These were wrapped around of a pair of 320mm Ducati Monster Brembo rotors. (the rotors bolt right on).
Of course the added stopping power meant I needed to control the dive from the already undersprung front (even for my 140 lbs). I added a set of .80/kg Racetech springs and 15w fork oil.
I snagged this beauty from a buddy of mine after a couple years of pestering
35k miles and well maintained. The Ebay shocks were too tall for my tastes, especially as heavy as these are. It also had a set of Keihins from a Triumph Adventurer. They bolt on, but the jetting was way too lean and was pretty unrideable.
I set out to slim up the lines right away and ordered a used seat from a Harley XL1200R/XL883R. I had to trim the seat pan a bit, and modify the front brakcet, but it wasn’t bad. I also removed the center section of the rear fender and moved the rear part forward.
It also had a Mac 3-1 that leaked terribly and I hated the sound. I snagged a nice Jardine slip-on setup and stock headpipes from a buddy in trade for the old shocks and the Mac.
I also fitted a Lucas tail lamp and smoked signals
Then after much more fiddling with the jetting, she was on the road!