Covers sandblasted and painted.
The fins are pretty holy and had a lot of silicone pumped into them…
First attempt at fibreglass seat; based off the MEEN STREAK XS750.
I didn’t get enough layers, and it has a few air bubbles so I’m going to have another go.
Tube is 30x30mm with a 2mm thick wall.
Also make sure the pivot is approximately through the center of mass so its easy to rotate. I’ve got a drop of about 150mm which works well.
I’ve just built one that is very similar and works great.
I ended up joining the top sides together to make sure it didn’t want to pull in at the top.
Looks like your connection to YamahaXS.com was lost, please wait while we try to reconnect.